How loud to make 808s6 min read

Reading Time: 5 minutes

There is no definitive answer to this question as it will depend on the specific 808s you are using and the track you are mixing them into. However, as a general rule, you want to make sure that 808s are not too loud or they will overshadow the other elements in your mix.

It is also important to note that you don’t want to make your 808s too bassy or they will be difficult to mix with other elements. Ideally, you want to find a balance between the two that works well with the rest of your track.

As always, it is important to experiment with different levels and settings until you find something that works well for your specific track.

How loud should your 808s be?

When it comes to 808s, how loud you should make them is a matter of personal preference. However, there are a few things to keep in mind when crafting your 808s.

First, the 808s should be loud enough to be heard in the mix, but not so loud that they drown out the other instruments. Second, you want to make sure that the 808s are in tune with the other instruments in the track.

Finally, you’ll want to experiment with different volumes and EQ settings to find the sound that you’re looking for. With a little bit of experimentation, you’ll be able to create 808s that are loud and in tune with the rest of your track.

What DB should kick and 808 be?

What DB should kick and 808 be?

This is a question that has been debated by many producers and musicians over the years. The two most popular choices for this combination are the Roland TR-808 and the Roland TR-909.

The TR-808 is a classic drum machine that was released in 1980. It is known for its punchy kicks and snares, as well as its deep and warm 808 bass sounds.

The TR-909 was released in 1984 and is very similar to the TR-808. It is also known for its punchy kicks and snares, as well as its deep and warm 808 bass sounds.

So, which drum machine should you use for your kick and 808 sounds?

Well, that depends on your own preferences and what type of music you are producing.

If you are producing hip-hop or R&B, then the TR-808 may be a better choice, as its kicks and snares are more punchy than the TR-909.

If you are producing techno or house music, then the TR-909 may be a better choice, as its kicks and snares are more punchy than the TR-808.

However, both machines can produce great sounding kicks and 808s, so it really comes down to personal preference.

So, which drum machine should you use for your kick and 808 sounds?

Well, that depends on your own preferences and what type of music you are producing.

If you are producing hip-hop or R&B, then the TR-808 may be a better choice, as its kicks and snares are more punchy than the TR-909.

If you are producing techno or house music, then the TR-909 may be a better choice, as its kicks and snares are more punchy than the TR-808.

However, both machines can produce great sounding kicks and 808s, so it really comes down to personal preference.

How do I make my 808 louder without clipping?

There are a few ways to make your 808 louder without clipping. One way is to use an equalizer to boost the low end. You can also use a compressor to make the sound more consistent. Finally, you can use a distortion pedal to add more distortion to the signal.

How do you make a 808 hit harder?

There are a few things you can do to make your 808 hit harder.

1. Make sure your 808 is well-tuned.

2. Use a distortion or overdrive pedal to add some grit to your sound.

3. Add some compression to your track to make your 808 hit harder.

4. Use a higher-quality sample or program your 808 yourself.

5. EQ your 808 to make it louder and more aggressive.

6. Use a stereo delay or other effects to add some width to your 808.

Should my 808 be mono or stereo?

When it comes to 808s, the question of whether they should be mono or stereo is a popular one. But what does it mean for an 808 to be mono or stereo? And which one is better?

In short, a mono 808 is just one signal, while a stereo 808 has two signals – one for the left speaker and one for the right. As a result, a stereo 808 will sound fuller and more natural than a mono 808.

For years, most people have been taught that mono is the better option when it comes to 808s. But in recent years, more and more people have been moving towards stereo 808s, as they provide a more realistic and fuller sound.

If you’re not sure which option is right for you, here are a few things to consider:

– If you’re using an 808 in a mix, and you have other instruments playing at the same time, you’ll want to use a stereo 808 to avoid any clashes.

– If you’re using an 808 as a standalone instrument, mono may be the better option, as it will take up less space in your mix.

– If you’re using an 808 for hip-hop or dance music, stereo may be the better option, as it will give your track more depth and power.

Ultimately, the decision of whether to use mono or stereo 808s is up to you. But hopefully this article has helped you make a more informed decision.

Are 808s kicks?

What are 808s? 808s are a type of bass kick that are named after the Roland TR-808 drum machine, which was one of the first drum machines to popularize this sound. 808s are characterized by their deep, low-pitched sound, and are often used in hip-hop and electronic music.

So, are 808s kicks? Yes, 808s are a type of kick, and they are characterized by their deep, low-pitched sound. They are often used in hip-hop and electronic music, and are a popular choice for bass kicks.

What dB is best for bass?

What dB is best for bass?

When it comes to bass, there is no one definitive answer to this question. In fact, the best dB for bass may vary depending on the type of music you’re listening to, the type of bass amp you’re using, and your own personal preferences.

That said, there are some general things to keep in mind when it comes to bass and dB. For example, a higher dB will generally give you a louder, more powerful sound. This can be great for gigs and other live performances, where you need to be heard over the other instruments and vocals.

However, if you’re looking for a more nuanced, subtle sound, a lower dB may be better for you. This is especially true if you’re using an amp with a lot of distortion. A high dB can easily overpower the sound of the bass, making it difficult to distinguish the individual notes.

Ultimately, it’s up to you to experiment with different dB levels and find what works best for you. But the general rule of thumb is that the louder the music, the higher the dB you’ll need.