How to pair ilive sound bar without remote6 min readReading Time: 4 minutes
How to Pair ilive Sound Bar without Remote
Most sound bars come with a remote control, but what if you lose the remote or it breaks? In this article, we’ll show you how to pair your ilive sound bar without the remote.
First, make sure your sound bar is turned on. You should see the power light on the front of the sound bar turn on. Next, press and hold the Bluetooth button on the sound bar for three seconds. You should see the Bluetooth light on the front of the sound bar start blinking.
Now, open the Bluetooth settings on your phone or tablet and select "ilive Sound Bar." The sound bar should automatically start pairing with your device. If it doesn’t, enter the PIN "0000."
Once the sound bar is paired with your device, you can use the volume buttons on the sound bar to adjust the volume. You can also use your phone or tablet to control the volume.
Table of Contents
- 1 How do I put my iLive sound bar in pairing mode?
- 2 Can I control my iLive soundbar with my phone?
- 3 How do you pair an iLive speaker?
- 4 How do you reset an iLive soundbar?
- 5 How do I connect my iLive soundbar to my Smart TV?
- 6 How do I reset my sound bar?
- 7 Can you use a universal remote for iLive soundbar?
How do I put my iLive sound bar in pairing mode?
In order to put your iLive sound bar in pairing mode, you will need to press and hold the Bluetooth button on the sound bar for about 5 seconds. Once the sound bar is in pairing mode, it will be discoverable by other Bluetooth devices. You can then connect to the sound bar by selecting it from the list of available devices on your Bluetooth enabled device.
Can I control my iLive soundbar with my phone?
Can I control my iLive soundbar with my phone?
Yes! You can control the soundbar with your phone by downloading the accompanying app. The app will allow you to change the soundbar’s settings, including the volume, bass, and treble.
How do you pair an iLive speaker?
When you want to use an iLive Bluetooth speaker, you need to pair it with your device. There are a few ways to do this, so here is a guide on how to do it.
To start, make sure your speaker is turned on. Then, hold down the Bluetooth button on the speaker until the light starts flashing blue. You will then see the speaker appear in the list of Bluetooth devices on your device. Tap on it to connect.
If your speaker is not appearing in the list of devices, you may need to enter the pairing code. The code is 0000 by default, but you can find it in the speaker’s instruction booklet if you have changed it.
Once the speaker is connected, you will be able to play music from it. You can also use the speaker to answer phone calls. To do this, just hold down the phone button on the speaker and it will connect to your phone.
How do you reset an iLive soundbar?
There may come a time when you need to reset your iLive soundbar. Maybe it isn’t responding to your commands, or the sound quality has diminished. No matter the reason, resetting your soundbar is a fairly simple process.
First, make sure your soundbar is turned off. Once it’s off, locate the small hole on the back of the unit. It’s next to the power cord. Using a paper clip or something small and thin, insert it into the hole and hold it for a few seconds.
After a few seconds, the soundbar will reset and turn back on. If you have any problems after resetting the soundbar, please consult the user manual or contact iLive customer support.
How do I connect my iLive soundbar to my Smart TV?
If you have an iLive soundbar and a Smart TV, you can connect the two devices together to improve the sound quality of your TV viewing experience. You can connect the soundbar to your TV in one of two ways: using the HDMI or optical audio ports.
If your TV has an HDMI port, you can connect the soundbar to the TV using an HDMI cable. Connect one end of the HDMI cable to the HDMI port on the back of the soundbar and the other end of the cable to the HDMI port on the back of the TV.
If your TV does not have an HDMI port, you can connect the soundbar to the TV using the optical audio port. Connect one end of the optical audio cable to the optical audio port on the back of the soundbar and the other end of the cable to the optical audio port on the back of the TV.
Once the soundbar is connected to the TV, you can configure the soundbar to automatically turn on and off when you turn on and off the TV. To do this, press and hold the power button on the soundbar for five seconds until the LED light turns off. then press and hold the power button again for five seconds until the LED light turns on. The soundbar will now be in auto power mode.
How do I reset my sound bar?
When you have a sound bar, there may be times when you need to reset it. This can be done in a few different ways, depending on the brand and model of your sound bar.
If your sound bar has a power button, you can usually reset it by pressing and holding the power button for a few seconds until the bar turns off. Once it’s off, wait a few seconds and press the power button again to turn it back on.
If your sound bar doesn’t have a power button, you may be able to reset it by unplugging it from the wall for a few seconds and then plugging it back in.
If neither of those methods work, you can try contacting the sound bar’s manufacturer for more specific instructions.
Can you use a universal remote for iLive soundbar?
A soundbar is a great addition to any home entertainment system, providing better sound quality than most built-in TV speakers. If you have an iLive soundbar, you may be wondering if you can use a universal remote to control it.
The answer is yes, you can use a universal remote to control your iLive soundbar. However, not all universal remotes will work with it. You’ll need a remote that is specifically designed to work with iLive soundbars.
If you don’t have a universal remote that is designed to work with iLive soundbars, you can purchase one online or at your local electronics store. Be sure to read the product specifications before purchasing to make sure it will work with your soundbar.
Once you have a remote that is designed to work with your soundbar, follow the instructions included with the remote to program it to control your soundbar. Typically, this involves pressing a few buttons on the soundbar and the remote to establish a connection.
Once the remote is programmed, you’ll be able to use it to control all of the functions of your soundbar, including power, volume, and input. You’ll be able to enjoy better sound quality with minimal effort.